AVMT - Aviation and Transportation Maintenance

AVMT-10100 Aviation Mathematics

This course provides a review of fundamental mathematics required for successful completion of other courses in the aviation curriculum, including algebraic equations, graphs, exponential and elementary trigonometry. 60 contact hours (60 lecture). Meets requirements of 14 CFR 147.

4

AVMT-10200 Introduction to Aviation

This general course is designed to acquaint student's with the many aspects of and career opportunities in the aviation industry.

1

AVMT-10600 Aviation Fundamentals

Students learn about aerodynamics, aircraft design, stability, control, Federal Aviation Administration regulations and publications, weight and balance, and ground handling of aircraft. 90 contact hours (60 lecture/30 lab). Meets requirements of 14 CFR 147.

4

AVMT-11000 Aircraft Structures 1

The focus of this course is riveting and sheet metal repair, including aluminum, forming and layout and oxyacetylene welding operation. Corrosion and corrosion control are also studies. 180 contact hours (60 lecture/120 lab). Meets requirements of 14 CFR 147.

4

AVMT-12000 Aircraft Electricity 1

This course provides a study of DC electrical circuits, Ohm's Law, magnetism, generators, regulators, motors, aircraft electrical circuit components, wiring diagrams, batteries and electrical meters. 120 contact hours (60 lecture/60 lab). Meets requirements of 14 CFR 147.

4

AVMT-13000 Introduction to A/C Structures and Engine NDT NDE

This combined lecture/laboratory course familiarizes the student with liquid penetrant, magnetic particle, eddy current, radiographic, sonic and ultrasonic evaluation procedures applicable to aircraft structures and engines using non-destructive testing methods. Interpretation of data to make independent and accurate airworthiness is emphasized. 60 contact hours (60 combined lecture/lab). Meets requirements of 14 CFR 147.

3

AVMT-13500 Drafting and Blueprint Reading

Lettering and use of equipment are studied, including orthographic projections, sectioning, auxiliary views, isometric and oblique views and reading of electrical, mechanical and hydraulic drawings. 45 contact hours (45 combined lecture/lab). Meets requirements of 14 CFR 147.

3

AVMT-20000 Aircraft Instruments

This course provides a study of pressure, mechanical and electrical instruments; compass system;, gyro instruments and systems; radio communications and navigation equipment; and auto pilot systems. 120 contact hours (60 lecture/60 lab). Meets requirements of 14 CFR 147.

4

Prerequisites

AVMT 12000

AVMT-20100 Aviation Physics 1

Students study the laws of physics with aviation applications, including structure of matter, gas laws, heat transfer, and properties of liquids. 60 contact hours (60 combined lecture/lab). Meets requirements of 14 CFR 147.

4

Prerequisites

MATH 11500

AVMT-20200 Aviation Physics 2

This course provides an advanced study of physics focusing on strength of materials, light, sound and atomic energy. 45 contact hours (45 combined lecture/lab).

3

Prerequisites

AVMT 20100

AVMT-21000 Aircraft Structures 2

A continuation of AVMT 11000, this course focuses on types of airframe structures, including wood and fabric applications and repairs, aircraft assembly and rigging, use and repairs of plastics and honeycomb repairs. 180 contact hours (60 lecture/120 lab). Meets requirements of 14 CFR 147.

4

AVMT-22000 Aircraft Electricity 2

A continuation of AVMT 12000, this course focuses on AC circuits, capacitance and inductance, AC generators, transformers, resonant circuits, electron tubes and solid state components. 120 contact hours (60 lecture/60 lab). Meets requirements of 14 CFR 147.

4

Prerequisites

AVMT 12000

AVMT-25100 Avionics 1

This course focuses on principles and approved installation procedures for aircraft radio communications, navigation equipment and related items. Lectures and lab are supplemented with slides, films, and a tour. 45 contact hours (45 combined lecture/lab).

2

Prerequisites

UAS majors: AVMT 12000

AVMT-31000 Aircraft Reciprocating Engines

This course in the construction and operation of all types of reciprocating engines includes study of engine nomenclature, operating principles, horsepower, calculations, engine efficiencies and cylinder arrangement, as well as methods of disassembly, cleaning, inspection, magnaflux, repairs and assembly and regulations pertaining to repair and overhaul procedures. 105 contact hours (45 lecture/60 lab). Meets requirements of 14 CFR 147.

4

AVMT-32000 Aircraft Systems

Students learn about hydraulic systems, air-conditioning, pressurization, fire detection, firefighting systems, rain control and pneumatic systems. 150 contact hours (60 lecture/90 lab). Meets requirements of 14 CFR 147.

4

AVMT-33000 Aircraft Engine Accessories

Aircraft fuel systems, float type carburetors, pressure injection carburetors, direct injection systems, water injection, jet engine fuel controls, types of ignition systems, magneto theory, magneto timing, spark plugs and use of the engine analyzer are covered. 180 contact hours (90 lecture/90 lab). Meets requirements of 14 CFR 147.

4

AVMT-34000 Composite Material Fabrication and Repair

A study of the various types of composites used on aircraft, part of this course includes vacuum bag manufacturing and repair of a honeycomb panel by each student in the laboratory. 45 contact hours (45 combined lecture/lab).

3

AVMT-34500 Trends in Aviation and Aerospace Technology

This class covers the trends that are relevant to technological advancements within the aviation and aerospace industry. Career opportunities, commercial trends, and the use of new technologies to enhance aviation and aerospace performance are discussed.

3

Prerequisites

FAA Airframe and Powerplant License.

AVMT-35100 Avionics 2

A sequel to Avionics 1, this course continues the study of the principles and approved installation procedures for aircraft radio communication, navigation equipment and related topics. Subjects covered include advanced navigation aids, such as RNAV, LORAN, GPS, RADAR, and auto pilots. 30 contact hours (30 combined lecture/lab).

2

Prerequisites

AVMT 12000 and AVMT 20000; AVMT 25100 or consent of Department Chair.

AVMT-40500 Aviation Technical Writing

This class studies grammar, spelling, composition of letters of application, resumes, references and the use of a word processor. A technical project report is completed during the semester. 45 contact hours (45 lecture). Meets requirements of 14 CFR 147.

3

AVMT-41000 Gas Turbine Powerplants

This course provides a study of the history of jet engines, turbojet and turboprop engine components and systems, gas turbine troubleshooting and trimming. 150 contact hours (60 lecture/90 lab). Meets requirements of 14 CFR 147.

4

AVMT-42000 Aircraft Propellers

The theory and operation of propellers and governors, as well as overhaul and servicing of fixed-pitch, ground-adjustable, controllable and turboprop propellers are studied. 120 contact hours (60 lecture/60 lab). Meets requirements of 14 CFR 147.

4

AVMT-42500 Aviation and Aerospace Propulsion Systems

To propel aircraft through the stratosphere with greater efficiency, faster speeds, and less carbon emissions, new propulsion systems have been engineered. This class covers commercial aircraft Turbofan Engines, Scramjet, Space Rocketry and Thruster propulsion systems.

3

Prerequisites

AVMT 34500, FAA Airframe and Powerplant License

AVMT-42700 Advanced Aviation and Aerospace Structures

This class covers advanced aluminum sheet metal repairs and advanced composite concepts and projects. The cutting edge of aircraft structural technology is addressed including commercial applications, space utilization, and supersonic structures.

3

Prerequisites

AVMT 34500, FAA Airframe and Powerplant License

AVMT-43000 Aircraft Inspection and Engine Testing

This course reviews types of inspections, use of inspection forms, log book entries, use of FAA publications, shop management responsibilities, engine operating procedures, troubleshooting, symptoms and diagnoses and engine instrumentation. 180 contact hours (60 lecture/120 lab). Meets requirements of 14 CFR 147.

4

Prerequisites

AVMT 31000 and AVMT 33000

AVMT-43500 Aviation and Aerospace Accessory Systems

Aircraft require advanced sub-systems to operate at high operational levels. Life support systems, pneumatics, bleed-air, pressurization, fly-by-wire or optic, and hydraulic systems are covered. With advancements in satellite navigation, advanced computer guidance and advanced multifunction display systems are also addressed in detail.

3

Prerequisites

AVMT 34500, FAA Airframe and Powerplant License

AVMT-47000 Helicopter Maintenance and Theory

Students learn about the design, operation, and maintenance of small- to medium-size helicopters. Part of the time is spent on the actual overhaul of light helicopters. 60 contact hours (60 combined lecture/lab).

4

Prerequisites

Consent of Department Chair.

AVMT-49500 Aviation and Aerospace Technology Capstone Experience

Students will demonstrate mastery of the entire Aviation and Aerospace Technology program. Students will be asked to repair anomalies, build models, test systems, and demonstrate an in-depth knowledge of advanced aviation and aerospace technology. A written report and project portfolio will be required. The paper and projects will be collaborative and will include input on pertinent topics from the instructor.

3

Prerequisites

AVMT 34500, AVMT 42500, AVMT 42700, AVMT 43500, FAA Airframe and Powerplant License

AVMT-49800 Aviation Internship

Students are placed in various aviation-related positions, arranged with an advisor, to provide them with on-the-job experience. A minimum of 120 contact hours required.

0-3

Prerequisites

Junior standing and consent of faculty internship coordinator.

AVMT-49900 Independent Study

This course is designed to meet the needs of aviation majors by allowing them to study an advanced topic not found in regular courses.

1-3

Prerequisites

Consent of Department Chair. To qualify for an Independent Study, a student must have successfully completed 60 credit hours, at least 12 of which were earned at Lewis, and have earned at Lewis University a minimum 3.0 cumulative GPA.